data sheet semiconductor http://www.yeashin.com 1 rev.03 20120705 ABS2 thru abs10 single phase 1.0 amp. glass passivated bridge rectifiers voltage range 200 to 1000 volts current 1.0 ampere features ? glass passivated junction ? ideal for printed circuit board ? reliable low cost construction utilizing molded plastic technique ? high temperature soldering guaranteed: 260 / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ? small size, simple installation leads solderable per mil-std-202, method 208 ? high surge current capability dimensions in inches and (millimeters) maximum ratings and el ectrical characteristics rating at 25 ambient temperature unle ss otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol ABS2 abs4 abs6 abs8 abs10 units maximum recurrent peak reverse voltage v rrm 200 400 600 800 1000 v maximum rms voltage v rms 140 280 420 560 700 v maximum dc blocking voltage v dc 200 400 600 800 1000 v maximum average forward rectified current on aluminum substrate i (av) 1.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 35 a maximum instantaneous forward voltage @ 0.4a v f 0 . 95 v maximum dc reverse current @ t a =25 at rated dc blocking voltage i r 10 ua ua typical thermal resistance junction to lead on aluminum substrate on glass-epoxy substrate r jl r ja 25 62.5 80 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 thin mini-dip (thin md) i2t rat i ng fo r fus i ng (t<8.3m s) i2t 10.4 a2t
ABS2 thru abs10 device characteristics 0 10 20 30 40 50 110100 peak forward surge current (a) number of cycles at 60 hz fig. 3 maximum non-repetitive forward surge current 0.01 0.1 1 10 100 0 20 40 60 80 100 120 140 instantaneous reverse current (ua) percent of rated peak reverse volyage(%) fig. 2 typical reverse characteristics ta=75 10 100 1000 0.1 1 10 100 1000 junction capacitance (pf) a reverse voltage (v) fig. 4 typical junction capacitance 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 instantaneous forward a current (a) forward voltage (v) fig. 5 typical forward characteristics 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0 102030405060708090100110120130140150160 average forward current (a) lead temperature ( o c) fig.1 maximum forward current derating curve ratings and characteristic curves http://www.yeashin.com 2 rev.03 20120705
|
